Delay Pedal
Delay Pedal lets you add echo to your guitar or synth signal from 60 ms to 1.5s of delay time. This can take your signal from a rapid spring-like echo to long canyon-like echo. By cranking the Repeats knob, the Delay will go on seemingly forever.
The pedal features controls for the number of Repeats, the length of Delay, and the amount of Mix of the original guitar signal with the delayed signal. A true-bypass footswitch helps to keep your tone pure when the pedal is not in use. Delay runs on 9V DC Negative Center power and consumes 85mA.
Delay Pedal lets you add echo to your guitar or synth signal from 60 ms to 1.5s of delay time. This can take your signal from a rapid spring-like echo to long canyon-like echo. By cranking the Repeats knob, the Delay will go on seemingly forever.
The pedal features controls for the number of Repeats, the length of Delay, and the amount of Mix of the original guitar signal with the delayed signal. A true-bypass footswitch helps to keep your tone pure when the pedal is not in use. Delay runs on 9V DC Negative Center power and consumes 85mA.
Delay Pedal lets you add echo to your guitar or synth signal from 60 ms to 1.5s of delay time. This can take your signal from a rapid spring-like echo to long canyon-like echo. By cranking the Repeats knob, the Delay will go on seemingly forever.
The pedal features controls for the number of Repeats, the length of Delay, and the amount of Mix of the original guitar signal with the delayed signal. A true-bypass footswitch helps to keep your tone pure when the pedal is not in use. Delay runs on 9V DC Negative Center power and consumes 85mA.
CONTROLS
Repeats: This controls the number of repeats from a few to infinite.
Delay: The length of delay between echos is controlled by this knob.
Counterclockwise=shorter delay. Clockwise=longer delay.
Mix: This controls the mix of the original signal with the processed signal.
Counterclockwise = more of the original signal. Clockwise = more of the processed signal.
Footswitch: True-bypass. Press the switch to route your input signal through the circuit or bypass the circuit.
Power: This pedal takes a standard 9V DC Center-Negative power supply with a 2.1mm negative center barrel. DO NOT RUN AT HIGHER VOLTAGES! Current Draw: 85mA
Warranty: This device has a limited lifetime warranty. If it fails or gives your problems, please email info@tre_audio.com.