Splitter Combo
The splitter combo includes the Buffered Splitter and the Passive Splitter.
The Buffered Splitter takes one 1/4” mono input and splits it out to two separate 1/4” mono outputs, each with its own buffer. Perfect for connecting a guitar to two amps or for adding a buffer anywhere in your signal chain to increase the strength of the signal.
The Passive Splitter combines eight 1/4” TS (mono) jacks in a standard 125B size enclosure. This can come in handy in the studio, on the stage, or wherever you need to quickly connect 1/4” cables. Try connecting a guitar to multiple amps or run your favorite pedal into multiple signal chains on your board.
The splitter combo includes the Buffered Splitter and the Passive Splitter.
The Buffered Splitter takes one 1/4” mono input and splits it out to two separate 1/4” mono outputs, each with its own buffer. Perfect for connecting a guitar to two amps or for adding a buffer anywhere in your signal chain to increase the strength of the signal.
The Passive Splitter combines eight 1/4” TS (mono) jacks in a standard 125B size enclosure. This can come in handy in the studio, on the stage, or wherever you need to quickly connect 1/4” cables. Try connecting a guitar to multiple amps or run your favorite pedal into multiple signal chains on your board.
The splitter combo includes the Buffered Splitter and the Passive Splitter.
The Buffered Splitter takes one 1/4” mono input and splits it out to two separate 1/4” mono outputs, each with its own buffer. Perfect for connecting a guitar to two amps or for adding a buffer anywhere in your signal chain to increase the strength of the signal.
The Passive Splitter combines eight 1/4” TS (mono) jacks in a standard 125B size enclosure. This can come in handy in the studio, on the stage, or wherever you need to quickly connect 1/4” cables. Try connecting a guitar to multiple amps or run your favorite pedal into multiple signal chains on your board.
CONTROLS
Input: Plug any standard ¼” mono guitar/instrument cable into the jack on the right of the enclosure.
Outputs: Plug standard ¼” mono cables into either or both of the two output jacks on the left of the enclosure.
Power: This pedal takes a standard 9V DC Center-Negative power supply with a 2.1mm negative center barrel. Current: 30mA. Note: the buffers require power to operate so the unit must be powered up to pass a signal. Without power, a guitar signal will NOT pass through the unit.
Warranty: This device has a one year warranty. If it fails or gives your problems, please email tre@tre_audio.com.
